Engine Mount Identifications - What is the missing one?

[Fast95BurMilly]

I know the middle one is the "front" side but can some identify position the left and right engine mounts in the picture?(Left Side, Right Side, Rear Side)

All so; the that is missing one is the? since there is only three and four is needed.

Could not contact seller so I decide to give the experts here the questions I have.

Thanks again.

P.S. the other two both look alike to me!

[yel-low]

Passenger side, front and rear mounts (identical looking but not the same) are pictured. The one that is missing is the driver's side trans mount..... but then again you could have figured that out on your own with a little research.

[Fast95BurMilly]

Passenger side, front and rear mounts (identical looking but not the same) are pictured. The one that is missing is the driver's side trans mount..... but then again you could have figured that out on your own with a little research. [/b]

Thanks Yel-low.

I wish I could be so smart; but I could not have. I have no idea what goes with what area. Total lost in other words. You are of course a genius!

[Fast95BurMilly]

Passenger side, front and rear mounts (identical looking but not the same) are pictured. The one that is missing is the driver's side trans mount..... but then again you could have figured that out on your own with a little research. [/b]

Can someone else help me to confirm that this is the correct identity of the engine mounts before I place my order for the missing part!

Thanks.

[Saint_]

Can someone else help me to confirm that this is the correct identity of the engine mounts before I place my order for the missing part!

Thanks.[/b]

Are you gonna buy from ebay? Ken says they are crap!

[luke@tiniusfamily.net]

If you need the mount, I am parting out a '94 millenia, and can sell you the mount for a LOT LESS than what you will find on e-bay.

[Fast95BurMilly]

Are you gonna buy from ebay? Ken says they are crap![/b]

Sorry to say that I made the purchase without consulting Mazdaworld. It look like a good deal and kind of say the word "Factory" and mistaken it to mean Mazda OEM! Did not realized this till afterwards.
Since their a three vendors: I just hoping that it will work out - that I pick the right one. Has 99.4% approval rating.

May not be liquid filled; but if it holds it in place; I will be worth the price since Mazda parts are like $300 per engine mount!

I need transaction mounts too by the way!

I know nothing I guess but not willing to spend $1,200 on engine mounts and another $500 for transmission mounts from Mazda. I know I cutting corners but too rich for me!

[luke@tiniusfamily.net]

Sorry to say that I made the purchase without consulting Mazdaworld. It look like a good deal and kind of say the word "Factory" and mistaken it to mean Mazda OEM! Did not realized this till afterwards.
Since their a three vendors: I just hoping that it will work out - that I pick the right one. Has 99.4% approval rating.

May not be liquid filled; but if it holds it in place; I will be worth the price since Mazda parts are like $300 per engine mount!

I need transaction mounts too by the way!

I know nothing I guess but not willing to spend $1,200 on engine mounts and another $500 for transmission mounts from Mazda. I know I cutting corners but too rich for me![/b]

Well like I said, if they don't work, I am parting out a '94 millenia, so I don't know if my mounts will work with your car, but if they will I will give them to you for next to nothing, like $50 a mount or so. I am flexible ;]

[ken inn]

Sorry to say that I made the purchase without consulting Mazdaworld. It look like a good deal and kind of say the word "Factory" and mistaken it to mean Mazda OEM! Did not realized this till afterwards.
Since their a three vendors: I just hoping that it will work out - that I pick the right one. Has 99.4% approval rating.

May not be liquid filled; but if it holds it in place; I will be worth the price since Mazda parts are like $300 per engine mount!

I need transaction mounts too by the way!

I know nothing I guess but not willing to spend $1,200 on engine mounts and another $500 for transmission mounts from Mazda. I know I cutting corners but too rich for me![/b]

the mounts are for a 2.5, NOT a 2.3. also, they are solid, not liquid filled. the engine will sit higher, and transmit more vibration. factory is an out and out lie. when i got the ebay mounts, i emailed the supplier several times. the next time i actually ordered one, and in the comments, i reminded the vendor the problems i had, and that if the mount was NOT oe, i would leave serious negative feedback. miracleously, i got a refund because they were "out of stock" and did not know when they would get more. so, i tried another, and got the same response. while they MIGHT work for the 2.5, and you may not be as picky as i am, if you have a 2.3 those buttco mounts will piss you off. plus, if you pay to have them installed, and especially the rear one, you will have to pay again, and have it done with the correct one. also, the passenger side one for the 2.3 will have to be modified, and even then, it will tear up the hood pad. but hey, your car. go for it

[Saint_]

Just cancel it before they ship. Its too much labor to use a crappy part. If you buy online they are $160/ea for the bigger ones. Tranny one is $90.