throttle body

[leemasters23@yahoo.com]

hi,could anyone tell me if the mx-6 2.5 throttle body will fit my mx-3 v6,1845cc and if so is there any advantage in doing so power wise.cheers

[klzejbone@aol.com]

hi,could anyone tell me if the mx-6 2.5 throttle body will fit my mx-3 v6,1845cc and if so is there any advantage in doing so power wise.cheers[/b]

If you want a 2.5l TB you will have to get one off a millenia. I'm not sure how it would work with your Im because the part that bolts to the TB is an oval port, and the 2.5 TB has a circular port. The 2.5 TB is larger though but I don't know if you will feel any power increase because of the air running into the k8 IM. It might work better if you just got a millenia IM and TB together and tryed to port match your heads to the IM Then you should see good gains.

Jeremy

[leemasters23@yahoo.com]

If you want a 2.5l TB you will have to get one off a millenia. I'm not sure how it would work with your Im because the part that bolts to the TB is an oval port, and the 2.5 TB has a circular port. The 2.5 TB is larger though but I don't know if you will feel any power increase because of the air running into the k8 IM. It might work better if you just got a millenia IM and TB together and tryed to port match your heads to the IM Then you should see good gains.

Jeremy[/b]

thanks for that,its good to get different idea,s,and yours soundlike not a bad one.i will do some more homework before i start any mods ,just toying with
theories.

[pearlwhite99]

Or you could just pull out the 1.8L and drop in a 2.5L from a Probe GT / MX-6 , 626 , Millenia and gain 30 HP. If you have the time and money get yourself a KLZE and drop it in and gain 60-70 HP.