New member, same problems (B2600i won't start)
So hears ago I had a B2600i, the ECU died in it multiple times, had it fixed each time, ran good for awhile. Anyways, that truck is long gone, I found a 92 with 84k on it recently and jumped. Needed a cheap daily driver. Everything has been fine until 2 weeks ago. I drove hime from work, no problems, 2 hours later, I left to go to a buddy's house, it sputtered a bit after I pulled out of the driveway. Stumbled a few times on the way to my buddy's. We left to go to a store and the truck stumbled a few times, then seemed OK, did it again, I decided to go back to my house thinknig maybe it was low on gas. It died on my street not to start again. Because of the randomness of the issue and no other symptoms, first thing I thought was ECU. I sent it off to AV PRo.. After install, nothing.. same ****. It would start and sound pretty soft for about 5 seconds then stall. I've disconnected the MAF, no change. If it were the MAF and I disconnected it, it will start, correct? We pulled the first spark plug, tested it for spark as I turned it over. The 80 amp fuse seemed bad, we broke it trying to test it. I will be replacing that today but do not think it is the problem. Thought it might be the distributor until i got spark. Looking for some ideas or things to check,
I'd really appreciate the input!
Brian
|