Mazda 6 Keyless Remote Reprogram

[jpvanniekerk]

Hi,

How do I reprogram my remotes of my Mazda 6 to do selective unlocking, when i press unlock once it should open only the drivers door and twice the rest of the doors, it would also be nice if the horn sounded once when locking the car. Is this possible on a 2008 Mazda 6?

[JoeScar]

Try this...it worked for my 2004 with a brand new key fob

Step 1: Open driver side door and leave open.

Step 2: Lock and Unlock the drivers door using the power door lock switch on the door

Step 3: Insert key into the ignition.

Step 4: Turn Key to ON position and return to Lock (off) position. Do this 3 times within 10 seconds. LEAVE key in the ignition in Lock (off) position.

Step 5: Close and open the drivers door 3 times. Leave door open after this step

Step 6: ECU should respond by locking and unlocking the doors once.

Step 7: Press any button on remote #1 twice. ECU responds by locking and unlocking the car doors.

Step 8: Additional remotes, repeat Step 7 for up to 3 remotes total.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series (about 4) of door locks and unlocks. You're done!